News
  Home | Help | Support | Contact | Index   
 Max Wright Limited  
www.maxwright.co.uk  
info@maxwright.co.uk  
  Martin Control Panels | Systems & Software | Search | MPS
  News | Instrumentation | Motor Control Centres | Busbar Systems | Documentation | Careers | Where We Are
  To Be Kept Up To Date About Max Wright Limited Enter Your Email Address -      Remove

New Bandit™ Raking Machine Software

The Brackett Geiger Bandit™ Raking Machine is supplied as a standard 250kg S.WL. design, and as with Brackett Geiger's overhead machines, optional grab designs are available for any type of screening application from sewage and household waste to river and sea intakes.

The raking arm of the machine is operated by three hydraulic rams for grab, linear, and lifting movements and is rotated at the base by a geared motor unit.

Bandit

The Brackett Bandit™ Raking Machine is supplied complete with a control panel housed within a GRP kiosk, which enables a variety of control methods.

Bandit

The Brackett Bandit™ raking machine is also available with a steel mounted structure for high flood conditions and culverts with no concrete support behind the screen.

Advantages of the Brackett Bandit™ Raking Machine.
Especially suitable for small inlets (land drainage/pumping stations)
No moving parts permanently submerged
Can turn 270 degrees and is therefore able to each difficult dumping areas
Very compact construction
Installation is easy to retrofit into existing site situations without the need for civil modifications
Very little horizon pollution
Direct dump into containers is possible without further transport applications
Grab can clean the complete barscreen in one stroke
Gripper handles large variety of debris (weed, plastic bags, driftwood, drink cans, urban waste, sewage, tyres, oil barrels etc)
Gripper rake tines penetrate the bar screen which removes debris hairpinned around the bar screen
Machine can operate fully automatically and is started by timer, level differential, external signal, or manual activation of automatic cycle.
Brackett Bosker raking machines are 'cost effective' to install.

Max Wright Limited has supplied new software to control the Bandit™ Raking Machine. The new software controls the complete sequence of operations of the Bandit via a Schneider PLC and MMI. The software can be configured to suit most applications where the Bandit is likely to be used. The software generates alarms to provide the operator with the exact location of the fault. Armed with this information Brackett Geiger are in a better position to provide a quick response and solve any problems that arise on site.

For more information about the Brackett Geiger Bandit™ Raking Machine visit http://www.brackettgeiger.co.uk/



Bookmark Page

© Max Wright Limited 2003. This HTML document and its contents must not be reproduced for any purpose without written permission.